Click the image to open the full-size file.
Convertible Heated Poncho with Snap Fasteners
One quilted panel becomes a wrap, a shawl and a poncho by closing the snap placket in different places. The arm openings are reinforced, the upper and lower zones switch separately, and the battery pocket is sized to a pack you can buy anywhere.
- Snap placket along one edge — wrap, shawl and poncho from one panel
- Reinforced arm openings with two snaps per side
- Bar-tack at both ends of every arm opening
- Upper-back-and-shoulder zone plus a separately switchable lower zone
- Neck opening kept clear of element runs
- Inner pocket sized to a common power bank footprint, with cable retention
- Snap spacing fixed as a number and tested on the actual fabric
- Machine washable with the electronics removed
Sampling 3–5 days · Bulk ready to ship in 7–10 days · MOQ from 100 units · Reply within one hour
Request a QuoteProduct attributes
Every field below can be adjusted to your market. Fields marked as an optional configuration are confirmed for your program on the quotation.
| Product type | Convertible heated poncho and shawl panel |
|---|---|
| Category | Heated ponchos |
| Wear modes | Wrap worn flat, shawl closed along one edge, poncho closed along both edges |
| Fastener | Metal snap fasteners along one short edge |
| Snap spacing | Fixed as a numeric value on the tech pack, tested on the actual fabric |
| Arm openings | Short reinforced opening on each long edge with two snaps |
| Opening reinforcement | Bar-tack at both ends of each arm opening |
| Outer fabric | Quilted face — made to your fabric requirement |
| Lining | Plush lining, cut pile |
| Quilting | Diamond stitch, pattern to your specification |
| Shell option | Water-resistant outer shell — optional configuration |
| Heating zones | Upper back continuing over each shoulder, plus a separate lower zone |
| Zone control | Upper and lower zones independently switchable — configuration confirmed on the quotation |
| Heat levels | Level count confirmed on the quotation |
| Neck opening | Kept clear of element runs so the collar can be folded back |
| Power source | USB power bank held in an inner pocket — pack supplied separately |
| Input rating | Voltage and current confirmed on the quotation |
| Connector | Type and cable length agreed before the pocket is designed |
| Battery pocket | Sized to a common pack footprint, with cable retention |
| Runtime claim | Stated only against a named pack — not published otherwise |
| Overheat protection | Fitted with an independent thermal cut-out |
| Timed shut-off | Configurable |
| Panel dimensions | Quoted as length by width, confirmed on the quotation |
| Closed circumference | Range the fasteners allow, quoted alongside the panel dimensions |
| Sizing | One size, worn over clothing and closed by the wearer |
| Washability | Machine washable with the power bank and controller removed |
| Care labelling | One wash sequence, identical on the care label and the instruction insert |
| Colour | Made to your colour standard |
| Branding | Private label — your woven label and packaging |
| Packaging | Optional configuration to your artwork |
| MOQ | From 100 units per SKU |
| Sampling | 3–5 days |
| Bulk lead time | 7–10 days |
| Certification | Destination-market certification quoted as a project cost |
| Origin | Made in Shaanxi, China |
Final specifications are confirmed on the quotation.
Detail images
Click any image to open the full-size file.
Typical uses
Desk and office
Worn as a shawl over the shoulders with the lower zone off, so the wearer stays warm without heating the whole room.
Stadium and sideline
Closed as a poncho with the arms free, so the wearer can still hold a phone, a programme or a flask.
Camping and travel
Packs down as a flat panel; the power bank is a separate item the customer already owns or buys with the product.
Gifting and seasonal programmes
Three wear modes from one SKU, which suits a retailer building a compact winter range.
Want this convertible poncho built to your specification?
Send us your wear modes, panel size and target market. We will come back with a fastener specification, a zone map and a sampling plan.