Quilted Heated Mattress Pad with Deep Skirt and Fine-Step Control
A heated mattress pad is bought on warmth and replaced because of the quilt. The element rarely fails first: the stitching lets go, the batting shifts into the corners, or the face thins where a sleeper turns. This pad is specified from the quilt outward, with the element routed through a channel the quilt pattern actually leaves available.
- Quilt pattern, channel width and stitch length fixed in the tech pack rather than left to the sample room
- Stabilised batting to limit migration, with a wash-cycle inspection step before approval
- Element routed between quilt lines, with the channel width set by the element's bend radius
- Reinforced corner seams on a deep elasticated skirt built to the mattress height you nominate
- Controllers detach before washing, and the drying limits are printed on the label
MOQ from 100 units per SKU · Sample in 3–5 days · Bulk ready to ship in 7–10 days · Reply within one hour
Product attributes
| Format | Fitted quilted mattress pad with an elasticated skirt; all standard bed sizes and custom dimensions |
|---|---|
| Face fabric | Cotton-blend woven face with a bound edge; other face qualities and weights on request |
| Quilting | Diamond pattern with channel width, stitch length and pattern repeat specified per market and confirmed on the sample |
| Batting | Stabilised batting as standard, with a bonded or scrim-backed option to limit migration under repeated washing |
| Element channel | Element runs in a channel formed between quilt lines; channel width set from the element's bend radius, not the pattern alone |
| Heating element | Distributed low-density element, positioned so no quilt stitch crosses it at a sharp angle |
| Heat steps | Fine-step control as standard, with the step count confirmed per model and the warmth of each step described in the setting table |
| Controllers | Single or dual controllers, one per side; control layout, labelling and display behaviour agreed per market |
| Automatic shut-off | Timed shut-off as standard; window set per model and stated on the label |
| Overheat protection | Active sensor control plus an independent non-resettable thermal cut-out |
| Skirt depth | Built to the mattress height nominated by the buyer, with a deep build available; corner seam reinforced rather than relying on the hem stitch |
| Elastic | Elasticated hem with a longer elastic run on the deep build; gathering controlled so the corner does not bunch under a sheet |
| Edge finish | Bound edge with a width chosen to resist curling after washing |
| Washability | Machine washable with the controllers and cords detached, in the order printed on the care label |
| Drying limits | Low-heat tumble or line dry as standard, with the temperature limit stated; unrestricted high-heat drying is not recommended |
| Care label | Destination-market language, covering removal order, wash programme, drying limit and storage |
| Cord | Cord length and exit position agreed per market, with a moulded strain-relief boot at the pad end |
| Sizes | Single, twin, full, queen and king as references; custom dimensions to your brief |
| Colour & branding | Custom face colour, binding colour, woven labels and retail packaging |
| Packing | Fold pattern, carton dimensions and compressed height confirmed on the sample; retail packaging format agreed with the buyer |
| Instruction sheet | Covers fitting, controller use, step table, washing, drying limits and storage |
| Batch traceability | Batch or lot marking linked to element, controller and cord set records |
| Change control | No electrical or firmware substitution without re-assessment and written approval |
| Testing & documentation | Assessment supported on the finished article for the destination market's scope; the applicable marking set is confirmed per order and per market |
| OEM / ODM | Custom quilting, batting, skirt depth, step count, controller layout, branding and retail packaging |
| MOQ | From 100 units per SKU |
| Sample lead time | 3–5 days |
| Bulk lead time | 7–10 days |
Final specifications are confirmed on the quotation. Dimensions, skirt depth, step count, timer window and packing format are set per model and market.
Detail images
Click any image to open the full-size file.
Full view — the quilted face, the bound edge and the deep skirt at the near corners.
Detail — stitch spacing across the quilt lines, the bound edge, and the reinforced corner seam where the skirt carries the elastic tension.
Typical uses
Pair this model with our electric heated blankets, heated throws and electric heating pads for a complete heated range under one private label. For the construction reasoning behind the quilting and the wash limits, read Quilted Heated Mattress Pads: Stitch Channels, Batting Migration and Wash Life.
More heated products
Specifying a quilted heated mattress pad?
Send your mattress depth, market and wash requirements. We will come back with a quilt pattern, an element routing proposal and a sampling schedule within one hour.