Click the image to open the full-size file.
Ultra-Thin Heated Glove Liners with Full-Fingertip Touchscreen
A liner is a component, not a glove. This one is cut to sit inside the glove the customer already owns: liner-weight knit, allowance for a closed fist, a cuff that anchors under the shell, and a battery pouch placed off the wrist bone.
- Fine-gauge liner-weight knit, thin enough to wear under an existing glove
- Pattern allowance for the change in circumference when the hand closes
- Cuff length set to anchor under the outer shell instead of riding down
- Conductive fingertips across the hand, not the index finger alone
- Seam placement kept away from the grip surface
- Slim flat battery pouch on the back of the wrist, clear of the wrist bone
- Short cable run with a moulded boot, on the same side as the element entry
- Machine washable with the pack and cable detached
Sampling 3–5 days · Bulk ready to ship in 7–10 days · MOQ from 100 units · Reply within one hour
Request a QuoteProduct attributes
Every field below can be adjusted to your market. Fields marked as an optional configuration are confirmed for your program on the quotation.
| Product type | Heated glove liner worn inside an outer glove or mitten |
|---|---|
| Category | Heated gloves |
| Knit | Fine-gauge liner-weight knit — made to your fabric requirement |
| Finished thickness at palm | Measured on the assembled liner, confirmed on the quotation |
| Thickness at finger joints | Measured on the assembled liner, confirmed on the quotation |
| Pattern allowance | Cut for the change in circumference when the hand closes |
| Fit | Close fit worn against the skin, sized independently of outer glove sizes |
| Cuff | Bound cuff, length set to anchor under the intended outer shell |
| Seam placement | Kept away from the grip surface |
| Touchscreen | Conductive fingertips across the hand — thumb and index only also available as an option |
| Conductivity durability | Rated for the liner's own wash cycle count without cracking at the flex point |
| Heating element | Fine-wire element routed without a ridge across the grip surface |
| Heating zones | Back of hand and fingers — routing confirmed on the quotation |
| Heat levels | Level count confirmed on the quotation |
| Battery pouch | Slim flat pouch on the back of the wrist |
| Battery position | Placed clear of the wrist bone |
| Cable run | Short run from the pouch to the element entry on the same side |
| Strain relief | Moulded rubber boot where the cable leaves the pouch |
| Power source | Rechargeable pack held in the wrist pouch — pack supplied separately or quoted as an optional configuration |
| Input rating | Voltage and current confirmed on the quotation |
| Runtime claim | Quoted only against a named pack and a named setting |
| Overheat protection | Fitted with an independent thermal cut-out |
| Timed shut-off | Configurable |
| Washability | Machine washable with the pack and cable detached |
| Wash cycle count | Rated figure confirmed on the quotation |
| Care labelling | One wash sequence, identical on the care label and the instruction insert |
| Sizes | Size range confirmed on the quotation, quoted separately from outer glove sizes |
| Colour | Made to your colour standard |
| Branding | Private label — your woven label and packaging |
| Packaging | Optional configuration to your artwork |
| MOQ | From 100 units per SKU |
| Sampling | 3–5 days |
| Bulk lead time | 7–10 days |
| Certification | Destination-market certification quoted as a project cost |
| Origin | Made in Shaanxi, China |
Final specifications are confirmed on the quotation.
Detail images
Click any image to open the full-size file.
Typical uses
Worn under an existing glove
Adds heat to a glove the customer already owns, without replacing it or changing its grip.
Cycling and commuting
Thin enough that brake and gear levers still read through the shell, and the wrist pouch stays clear of the wrist bone.
Outdoor work and photography
Fingertips conductive across the hand so a phone or camera control works without removing a layer.
Indoor typing and driving
Thin profile intended for tasks where a full heated glove would be too bulky to operate anything precisely.
Want these liners built for your outer glove?
Send us the glove or mitten the liner will be worn with, your size range and your market. We will come back with a pattern allowance, a battery position and a sampling plan.